ElecGear 4個EL2交換用ジョイスティック + 追加のギフトドリフト修正可変抵抗器、PS4/PS3コントローラー対応のFU 10Kアナログスティック コントローラ センサー サムスティック モジュール修理部品
- Air transport prohibited
- New
- 3rd party seller
- EL2 FU 10K for PS4 / Some PS3
Price: ¥1774
色: EL1 ALPS 10K for PS4, EL2 FU 10K for PS4 / Some PS3, EL3 for Switch Pro / Some PS3, EL4 for Xbox, EL6 ALPS 2.1K for PS5 / Some PS4, EL7 FU 2.3K for PS5
Japan Domestic Shipping: ¥0
Estimated delivery time: 明日 9月18日にお届け
Seller
Item Description
Please go to B0CYBRZ2YP for the Hall Effect version and calibration PCB for PS4
Please take a look at product ID: B0BK7169M8 for the desoldering kit
EL2 FU 10K for PS4 and some PS3 controllers
4x replacement analog joystick was found in some PS4 DualShock 4 came with PlayStation 4 Pro, and some PS3 controllers also use this version. The thumbstick module was made by Favor Union (FU). The stick controller comes with 10KΩ trimmer potentiometers in orange. The 14 prongs were positioned as the same as ALPS edition. Technically, the whole unit is interchangeable with EL1 ALPS 10K used in PS4 controllers, and other brands like ‘Scuf’ and ‘Razer Raiju Ultimate’ with ALPS joysticks inside. However, the trim pot resistor alone is not interchangeable with ALPS edition
✔ Replace the wiper alone even without soldering
In some cases, you can just replace the wheel in the potentiometer to solve specific problems like: Stuttering, dead zone, creeping, or not as responsive as it should be
✔ Replace the potentiometer alone with an iron
80% chances of joystick problem are caused by the sensor. In another words, the rotary mechanism and the tactile switches are not the problem. De-soldering the unit with only 3Pin can be easier than replacing the entire module with as many as 14 prongs
✔ A heat gun to replace the whole module
This is the most suggested for an experienced soldering expert
✔ Experts with a normal iron to replace the whole unit
For a soldering expert with no professional de-soldering wick braid, solder sucker pump or hot air rework station at hand. To make it easy, we suggest crushing the problem joystick into small enough pieces with a pair of pliers
✔ By professional technicians in a cellphone repair shop
Suggested for someone with no handy tools
| 商品の重量: | 30 g |
|---|---|
| 商品モデル番号: | EL2-FU-10K |
| メーカー型番: | EL2-FU-10K |
| メーカー: | ElecGear |
| 対応アイテム: | Playstation 4 |
| UPC: | 682141318000 |
| ハードウェアプラットフォーム: | ゲーム機 |
| 梱包サイズ: | 9.1 x 3.3 x 3.2 cm; 30 g |
| 型番: | EL2-FU-10K |
| ブランド: | ElecGear |
| カラー: | EL2 FU 10K for PS4 / Some PS3 |
| Amazon.co.jp での取り扱い開始日: | 2020/7/9 |
| ASIN: | B07R7RJ4KY |
| ブランド名: | ElecGear |
| 色: | EL2 FU 10K for PS4 / Some PS3 |
| 対応デバイス: | Playstation 4 |
| 同梱バッテリー: | いいえ |
| メーカー名: | ElecGear |
| メーカーにより製造中止になりました: | いいえ |