Product Introduction The driver is a high-performance 4-axis stepper motor driver that supports pulse direction control. It has the advantages of strong anti-interference ability, good stability, low cost, etc. It also has the advantages of small size, low heat generation, and high power. Performance characteristics Power supply 12-48VDC Input signal photoelectric isolation Impulse response frequency up to 1MHz Stationary current adjustable Up to 256 subdivisions adjustable The maximum output current is 6A, 8 gears are optional Automatic overcurrent and overvoltage protection H-bridge bipolar constant current drive Electrical Specifications Supply voltage: 12-48VDC ( typical value is 36V DC ) Output current: 1.4-6A Control signal input current: 5-20mA ( typical value is 10mA ) Pulse frequency: 0-1000KHz Step pulse minimum width: 0.5us Direction signal minimum width: 2us Environmental indicators Cooling method: Free cooling or forced cooling Use occasions: Avoid dust, oil mist and corrosive gases Working temperature:0-+50℃ Maximum ambient humidit: 90%RH9 (no condensation or water droplets) Shock: 5.9m/s² Storage temperature:-40-+80℃ Power interface + : The positive terminal of the power input, the input voltage range is 12-48VDC, the current is more than 4A -: Power input negative terminal Stepper Motor Interface A+: Connect to the A+ end of the stepper motor A-: Connect the A- end of the stepper motor B+: Connect to the B+ end of the stepper motor B-: Connect the B- end of the stepper motor

メーカー名:	RTM
商品の重量:	0.4 キログラム
電池使用:	いいえ
商品重量:	0.4 キログラム
製造元リファレンス :	NV5160T4
梱包重量:	0.46 キログラム
ブランド:	RATTMMOTOR
メーカー:	RTM
メーカーにより製造中止になりました:	いいえ
Amazon.co.jp での取り扱い開始日:	2023/10/17
製品サイズ:	9.8 x 7.8 x 4.7 cm; 400 g
ブランド名:	RATTMMOTOR
UPC:	754193193178
ASIN:	B0CL6F3C74
商品高さ:	47 mm